iR6000

[waffu22]

Hi to all the reader,

I need your help. My machine got an error 602 - 003. If you have SST and firmware for iR6000 kindly send it to me? orp_switch@yahoo.com.

Thank you.

[teckat]

Hi to all the reader,

I need your help. My machine got an error 602 - 003. If you have SST and firmware for iR6000 kindly send it to me? orp_switch@yahoo.com.

Thank you.

E602 Sub Code 0003. Before replacing HDD>>if u can get in service mode first do a / CHK-TYPE / HD CLEAR in Service Mode. This could resolve the Error code. If not try the next check>
At times, a sector error occurs when the power is turned off while data is being written to the HDD. This will indicate 'E602-0003' and prevent the machine re starting.
Turn off power hold down the '1' and '9' keys on the keypad , keep holding and turn on power in approximately 6-8 seconds. A flashing block will show in the top left corner of the LCD. Normally, 'HD-Check' lasts about 15-20 minutes, and ends if no fault is encountered.

check your e mail