iR6800cn, e000000-0020

[songela]

Please help,
This error keeps on reocurring, I replaced the 3 thermistors and sub-thermistors and observed all the precautions required by the procedure but all in vain. I need your advice

[mrfixit51]

I believe our friend is experiencing fuser error codes, E000 subcode 0020.

0020

After power-on, the temperature does not
reach 50 deg C within 180 sec.

Check for an open circuit and poor contact in the main
thermistor, thermal switch, and heater; then, reset in service
mode: COPIER>FUNCTION>CLEAR>ERR.

You may have a piece of paper caught in the mating connectors of the feeder frame, check for some open circuit between the fuser and the DC controller.

[matjaz]

What are the fixation roller? Is a nice spin and how many prints are made. "life is 150,000 prints"