If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
this conon is not sending peper through free it stop after copy inside the tampo and when i take it out it copy on 75% insted on 100%zoom that i set it on.help & thanks in advance.
this conon is not sending peper through free it stop after copy inside the tampo and when i take it out it copy on 75% insted on 100%zoom that i set it on.help & thanks in advance.
u mean from top feeder unit/ of glass copy
Check that the Country Code has been set. Enter Service Mode> #CLEAR >OK > TYPE > OK > select the Country
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment