Canon IR1025if Black Display

[Tim C]

I have a Canon IR1025iF giving me only a black display. It goes thru its rotation power light is on...seems dead, other than that.. Any and all help will be appreciated. I have a 1023 manual, the same machine i think

[mrfixit51]

Similar, not the same. If you put a doc on the glass and press copy,, do you get anything out of it?

[Tim C]

Similar, not the same. If you put a doc on the glass and press copy,, do you get anything out of it?

No Nothing...at all happens,, I am thinking dc controller or Power Supply

[mrfixit51]

Hip shot would be power supply,,, forgot to ask,, was green idiot light on, on the front panel?

[Tim C]

Hip shot would be power supply,,, forgot to ask,, was green idiot light on, on the front panel?

Yes the Green light is on.. I flip the power switch on and the machine cycles, screen turns black. nothing works after that. light stays green
Thanks
Tim

[Windpomp]

Were u busy doing a firmware upgrade when it happened?

[Tim C]

No, the customer was running copies and turned it off to let it cool down "they said"... and when they went to turn it back on , black screen came up, green light, rotation and thats it.

[Windpomp]

Last time i had a problem like that it was the main board, teck was busy with upgrade and switched the machine off too soon. We had to replace the DC cont(main board). Sorry.