Irc3220 SLAT Sensor

[hknwbec]

Hi, Could you tell me where is the SLAT Sensor Display on Service Mode : Copier/Display/MISC/Window-YMCK and in which page of Parts Manual.

[SCREWTAPE]

I believe its on the drum unit.

[hknwbec]

Hi SCREWTAPE

I had tried to disassemble the drum unit of IRC3200 and found that there was only one toner sensor called " TDK TS0524ANA-117C " and without any sensor inside the drum unit. may be it is called SLAT sensor right ?

[mutti8000]

Hi, Could you tell me where is the SLAT Sensor Display on Service Mode : Copier/Display/MISC/Window-YMCK and in which page of Parts Manual.

Hi, I think you mean the SALT sensor, right? It's sitting right above the ITB belt near the bypass tray. It's the SALT assembly you have to pull upwards in ordre to get the ITB out.,

[hknwbec]

Mutti8000

Thanks for your reply, I know ITB has sensor near the bypass tray, but I want to know where is the location of this sensor on the attached imageSALT Sensor拷貝..jpg

[CanoNiR]

Hi, I think you mean the SALT sensor, right? It's sitting right above the ITB belt near the bypass tray. It's the SALT assembly you have to pull upwards in ordre to get the ITB out.,

You are absolutely right.
To hknwbec: see fig.321 Parts Catalog page 2-68

[hknwbec]

Thanks Thanks all of you ! it's J960 (TPS1)

[SCREWTAPE]

Here's the location of the salt sensor.

[teckat]

Thanks Thanks all of you ! it's J960 (TPS1)

FN1424110200_Figur&#.JPGFH7-7601-030 salt sensor> what it your issue on this machine