CANON ir2270 HDD

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #16
    Originally posted by copy_suhail
    Good day

    I got the hd clone programe but i have a problem when copy the copier hd to the another new one that the Operation stop in 56% , I try more than one new hd and same problem .


    Canyou please solve this problem

    thanks,


    Clone No'
    k1574318..jpg

    SST YES'


    SST..jpg
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • ymmtech
      Trusted Tech
      • Jun 2009
      • 190

      #17
      LBA,HPA.
      Knows above terms = close to success.

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #18
        Originally posted by ymmtech
        LBA,HPA.
        Knows above terms = close to success.
        HPA Problems When Upgrading Hard Disk

        Some people will eventually want to upgrade their hard disk to a new disk with larger capacity. Users should be warned about a unique problem that may occur in certain circumstances. If you try to replace your hard disk with a larger disk, if you try to clone the contents of your original disk to the new disk, and if your original disk contains HPA-based MediaDirect, then you may discover your new disk's capacity becomes truncated to the size of the original disk.

        For example, say you wish to replace your 60 GB disk with a new 120 GB disk. To avoid reinstalling everything, you decide to use something like Acronis True Image or Symantec Ghost to clone the contents of the 60 GB disk to the 120 GB disk. When you try to boot the new disk, however, it blue-screens or fails to boot, and a check of the BIOS settings shows the BIOS thinks your new disk is around the same size as the old disk! No amount of recloning, reformatting, repartitioning, or rejumpering will get the BIOS to recognize the full size of the disk.

        During the process of cloning, some utilities will copy the entire first track from the original disk, which includes the Dell MBR (in LBA Sector 0) and the HPA boot code (in LBA Sector 3). The problem is caused when both of these sectors are carried over to the new disk. The problem is avoided if either one or both sectors are not copied.
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • ymmtech
          Trusted Tech
          • Jun 2009
          • 190

          #19
          Thanks teckat.

          Comment

          • teckat
            Field Supervisor

            Site Contributor
            10,000+ Posts
            • Jan 2010
            • 16083

            #20
            Originally posted by ymmtech
            Thanks teckat.
            welcome_clipart..JPG
            **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • vj200729
              print mate

              50+ Posts
              • Apr 2008
              • 81

              #21
              you can do it with hdclone professioel 3.8/4 shared.com

              Comment

              • teckat
                Field Supervisor

                Site Contributor
                10,000+ Posts
                • Jan 2010
                • 16083

                #22
                Originally posted by vj200729
                you can do it with hdclone professioel 3.8/4 shared.com

                its_over_card-p13&.jpg
                **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                Working...