Canon Irc5180 with Imagepass H1 Fiery

[pacman]

Thank ya, sir....gonna test it out.

I went to EFI's site and pulled down the windows 1.0 driver. It worked perfectly. I think this one may be the same driver that I had before, but I shall work with it!

[pacman]

You know what else I just figured out.....I think I have server version 1.02, not 2.0. The drivers I had were for 2.0. DOH.

[KenB]

I would highly recommend that you update the system software (and drivers) to version 2.0. There were a ton of changes between the two.

You'll need to update the firmware on the copier as well. 2.0 won't work with the older versions... been there....no fun....

[pacman]

Thanks Ken. How would I get ahold of those upgrades?

[KenB]

You have to order the CDs from Canon.

There are 4 CDs, and 4 separate part numbers, if I remember correctly.

Pretty inexpensive, but not free. You don't really pay for the software, but rather the media it comes on, packaging, etc...

[pacman]

Thank you Ken and Tekcat......your help has been greatly appreciated. I added some rep in return.

[teckat]

Kool !!!!!!!!!!!


imagePass H1 V2.0
part # FK2-2262-000/ call Canon to order/ latest should have the latest v2.0 patches

what is 5180 firmware ver./ check on RUI

[KenB]

Anytime

[teckat]

1technical_suppo&#114.jpg