Help with IR2200 install

[felixdl]

What i means is the sw27 bit 7 was already 1, since the beginnig
and under communication setting i don't have fax setting.
Tank you for your patience

[teckat]

What i means is the sw27 bit 7 was already 1, since the beginnig
and under communication setting i don't have fax setting.
Tank you for your patience

Have u look under the ADDITIONAL FUNCTIONS>System Settings screen for> COMMUNICATIONS SETTINGS ?????? click on picture below

screen..JPG
If u don't see COMMUNICATIONS SETTINGS=u have no Fax Board installed
When the FAX Board is not attached, “Report Settings,” “Custom Fax Settings,” and
“Communications Settings” are not displayed

Do you have the (Optional) Super G3 Fax Board-J1 installed on this printer ?????

go in service mode
Starting Service Mode and Making Selections
1) Press the User Mode key * .
2) Press ‘2’ and ‘8’ on the keypad at the same time.
3) Press the User Mode key * on the control panel.
Press the Reset key once to return to the Service Mode Initial screen .
• Press the Reset key twice to end service mode and return to the User screen.

look for FAX tab indicator for it's mode

[felixdl]

This machine use to be the main one in the office, and every fax passed through her. Now this is the secondary machine nd I don't want her to answer but I still want to send fax.
I see ADDITIONAL FUNCTIONS>System Settings screen for> COMMUNICATIONS SETTINGS , after that, there is nothing about custom fax setting . AT this place I can change the speed (33600) and some other thing, but I see some free space in this 3 pages menu.
Since the beginning this parameter is that way : FAX>NCU>SpecialB> SW27 0 1 0 1 0 1 1 1

Thank you again

[teckat]

Enter Service Mode : Fax > Type > Site Setting >change to a different country then u are in/ u will be able to send and it will block all incoming faxes

[brianburks]

Same issue with additional fax RX settings

I own an ir3025. The machine shares the telephone line with voice users. I need the fax line to listen for an incoming fax and take over when the incoming call is from a fax machine. I have read the posts from Tekcat to a user regarding expanded communications settings. I do not have the ability to view the expanded communications settings. I have verified that bit 7 is set to 1 as noted in the posts and restarted my machine to no avail. Will you please advise?

[teckat]

I own an ir3025. The machine shares the telephone line with voice users. I need the fax line to listen for an incoming fax and take over when the incoming call is from a fax machine. I have read the posts from Tekcat to a user regarding expanded communications settings. I do not have the ability to view the expanded communications settings. I have verified that bit 7 is set to 1 as noted in the posts and restarted my machine to no avail. Will you please advise?

Check your PM

[darknet93]

Re: Help with IR2200 install

Hi , i just want to ask something. what i need to do if i want to set like 5 times ringing on the phone and then it will go to fax machine iR3025?