[Error Code] Image Press C1 error code E000007-007

[COCODIAZ]

I have this error code, can help me please.

[SCREWTAPE]

Your lower fixing belt is walking.

When was the last time the fixing unit was rebuilt.

[teckat]

I have this error code, can help me please.

Reads as E007-007
E007

Belt displacement error




0007

Detection of displacement error by the double error detection


The fixing belt may be displaced while rotating.
Turn the gear until it stops.

[B]If turned in the direction shown by [A], the fixing belt shifts closer to [a] when turning the belt.
If turned in the direction shown by [B], the fixing belt shifts closer to when turning the belt.
E315-RPL-FIXG-0155..jpg
Turn the belt to shift the fixing belt to the center position.
After placing the fixing belt position to the center, turn off and then on the power.

[SCREWTAPE]

Also after replacing the belt make sure to apply silcon oil to the marked area of the pressure pad cover.
There is a 100K QA Kit: F02-5812-000. When ever I rebuilt the fixing unit I use the QA kit.

[teckat]

I have this error code, can help me please.

If u have never replaced belt / get a manual/ or ask for
H..jpg

[COCODIAZ]

Thanks guys, i never replaced belt, and dont have manual. But I turn the belt to shift the fixing belt to the center position and work ok
Have to replace the belt ?

[teckat]

Thanks guys, i never replaced belt, and dont have manual. But I turn the belt to shift the fixing belt to the center position and work ok
Have to replace the belt ?

Thanks, good work

fixing belt= about 100,000K under normal conditions

[SCREWTAPE]

Thanks guys, i never replaced belt, and dont have manual. But I turn the belt to shift the fixing belt to the center position and work ok
Have to replace the belt ?

Gald your up and running.
Do not attempt to do any work on the fixing unit if your not sure how too.
Let a professional tech do it. You got lucky this time.

[teckat]

SCREWTAPE is on the Money

call for help or suffer the consequences

call..jpg