canon cp 660 E353 (SOLVED)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • remielee
    Technical Analyst

    100+ Posts
    • Mar 2010
    • 140
    #1

    canon cp 660 E353 (SOLVED)

    Hello guys! before anything else i would like to thanks sir teckat and sir canoNir for giving me help, instructions and additional info. without you guys i cannot be able to solve my problems.

    the E353 is the mismatch serial number of scanner that must be input to the machine.
    Under OPTION>USER>
    SERIAL in service mode, enter the five-digit serial No. of the

    reader unit using the keypad, and press the OK key.
    After that the machine goes to warming up and its ok now.

    thanks again guys your awesome!!!
    Tags: 660, canon, e35, enter, info, input, instructions, lef, left, mode, number, option, press, sca, scan, scanner, serial, service, solve, solved, unit, user, warming, warming up
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Originally posted by remielee
      Hello guys! before anything else i would like to thanks sir teckat and sir canoNir for giving me help, instructions and additional info. without you guys i cannot be able to solve my problems.

      the E353 is the mismatch serial number of scanner that must be input to the machine.
      Under OPTION>USER>
      SERIAL in service mode, enter the five-digit serial No. of the

      reader unit using the keypad, and press the OK key.
      After that the machine goes to warming up and its ok now.

      thanks again guys your awesome!!!
      thank-you..jpg
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        Previous template Next
        Working...