ir 2200i E602-003

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • remielee
    Technical Analyst

    100+ Posts
    • Mar 2010
    • 140
    #1

    ir 2200i E602-003

    hello sir about my previous post of Error code E00732-0001 that become E602-003 because of swaping main controller board.

    now im trying to download the system software but i am confusing i only have a firmware ir 2200, ir 2200H and ir 2200N i dont know if its the same in ir 2200i since my machine is ir 2200i. please sir send me an aid to figure out my problem. thank you in advance i dont know what should i do either i will start to downloaded it or not because i have no idea of the compatibility of the said system software. wait for your reply sir. more power to all you guys
    Tags: 200, 220, 2200, code, compatibility, controller, download, e007, e602, error, error code, firmware, fusing, ir 2200, load, main, power, roller, send, software, start, sys, system, wait
    • SCREWTAPE
      East Coast Imaging

      Site Contributor
      2,500+ Posts
      • Jan 2009
      • 3396
      #2
      2200 firmware is not the same as 2200i.

      If you have a IR2200i then you need 2200i firmware.
      When you search for 2200i firmware, you should be looking for 3300i firmware.

        Comment

        • remielee
          Technical Analyst

          100+ Posts
          • Mar 2010
          • 140
          #3
          Originally posted by SCREWTAPE
          2200 firmware is not the same as 2200i.

          If you have a IR2200i then you need 2200i firmware.
          When you search for 2200i firmware, you should be looking for 3300i firmware.

          ah i see, ok sir screwtape thanks for your reply and additional info, i will try to search ir 3300i firmware.

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Originally posted by remielee
              ah i see, ok sir screwtape thanks for your reply and additional info, i will try to search ir 3300i firmware.
              62358..jpg
              ATT00010 copy..jpg
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • SCREWTAPE
                  East Coast Imaging

                  Site Contributor
                  2,500+ Posts
                  • Jan 2009
                  • 3396
                  #5
                  Originally posted by remielee
                  ah i see, ok sir screwtape thanks for your reply and additional info, i will try to search ir 3300i firmware.
                  Ah I'm glad you understand.

                  Good luck.

                    Comment

                    Previous template Next
                    Working...