iRc2570ci

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hemai2005
    Professional Print

    100+ Posts
    • Jan 2010
    • 108

    #1

    iRc2570ci

    hi all
    can anybody help me in this problem,that is the message come on the screen (message Board)i dont know what this and machine needed password i make clear 3 week ago but problem return again
    thanks in advance
    sigpic
    Learned a lot will become an expert
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Originally posted by hemai2005
    hi all
    can anybody help me in this problem,that is the message come on the screen (message Board)i dont know what this and machine needed password i make clear 3 week ago but problem return again
    thanks in advance
    what message ?? what password issue ??
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • SCREWTAPE
      East Coast Imaging

      Site Contributor
      2,500+ Posts
      • Jan 2009
      • 3396

      #3
      Select "Additional Functions", then "System Settings" you will notice that the "Clear Message Board" soft switch is highlighted then select "Clear Message Board".

      If the message persists then enter Service Mode > Copier > Function > Clear > MMI select the OK key and cycle the Main Power Switch. Be aware that all user mode settings will be cleared.

      Comment

      • hemai2005
        Professional Print

        100+ Posts
        • Jan 2010
        • 108

        #4
        Originally posted by SCREWTAPE
        Select "Additional Functions", then "System Settings" you will notice that the "Clear Message Board" soft switch is highlighted then select "Clear Message Board".

        If the message persists then enter Service Mode > Copier > Function > Clear > MMI select the OK key and cycle the Main Power Switch. Be aware that all user mode settings will be cleared.
        thanks
        you can make it off from RUI
        do you have any idea about Fiery global university
        thx again
        sigpic
        Learned a lot will become an expert

        Comment

        • SCREWTAPE
          East Coast Imaging

          Site Contributor
          2,500+ Posts
          • Jan 2009
          • 3396

          #5
          Originally posted by hemai2005
          do you have any idea about Fiery global university
          No!

          What is Fiery global university??

          Comment

          • teckat
            Field Supervisor

            Site Contributor
            10,000+ Posts
            • Jan 2010
            • 16083

            #6
            Originally posted by SCREWTAPE
            No!

            What is Fiery global university??

            Fiery Global University’s eLearning Courses


            Link is below

            https://training.efi.com/purchase/courses.asp

            EFI - EFI Course Descriptions


            1..jpg
            **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • SCREWTAPE
              East Coast Imaging

              Site Contributor
              2,500+ Posts
              • Jan 2009
              • 3396

              #7
              Ahh!!

              Comment

              • hemai2005
                Professional Print

                100+ Posts
                • Jan 2010
                • 108

                #8
                Originally posted by teckat
                Fiery Global University’s eLearning Courses


                Link is below

                https://training.efi.com/purchase/courses.asp

                EFI - EFI Course Descriptions


                [ATTACH=CONFIG]5050[/ATTACH]
                GREAT
                sigpic
                Learned a lot will become an expert

                Comment

                Working...