copy problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ajeet
    • Jun 2025

    #1

    copy problem

    hi everyone

    i m facing a problem in ir 3300 if we give counter one copy is coming and after that second copy stucks in feeder.machine is totally hang jam indication comes after 30to 40 seconds.kindly help me out.

    thks
  • Aneurysm
    Administrator

    1,000+ Posts
    • Jan 2005
    • 1030

    #2
    test
    "Remain calm. All is well." -Chip Diller, Nov 1963

    Comment

    • mrfixit51
      Lead Service Technician

      1,000+ Posts
      • Oct 2008
      • 1975

      #3
      Post your jam codes if you would like assistance with this problem, the information given is too sketchy to give you any advice...
      "Once a King, always a King, but once a Knight is enough!"

      Comment

      • SCREWTAPE
        East Coast Imaging

        Site Contributor
        2,500+ Posts
        • Jan 2009
        • 3396

        #4
        Jam codes do help.
        But I think I understand what your trying to say.
        I would check clutches, sensors, I don't remember if this machine had a sensor init adjustment in service mode, if so try that.

        Comment

        Working...