iR7095 & iR7105

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #16
    do u need a dedicated line outlet for each connection ???

    if so the cost of that would drive customers off the cliff~~~~~~~~~~~\\\\\

    u have to fight with sales & customers to let them know most iR'S need and or operate better with a dedicated line for their printer.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • charm5496
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2008
      • 2387

      #17
      We requested two dedicated outlets and put a line filter on the machine itself. Then there were two non dedicated outlets there as well which we used for the paperdeck, fiery and folding unit.1142_001.pdf
      Here is the breakdown of the accessories and what power is needed.
      Accidents don't just happen. They must be carelessly planned.

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #18
        some cheap customers would go out & get power strips at the dollar store/ u cant believe what i have seen printers hooked into/ had many demos at customers who said "Go ahead an plug it in that strip" i always warn beforehand/
        Result always the same / all circuit breakers trip in office/ =no printers/no faxes/no computers all down- only emergency lights on .


        another sales-jerk move, there all the same
        613b78045d7344b02c111ca23f618c65.jpg
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • davidj7
          Service Manager

          Site Contributor
          1,000+ Posts
          • Jan 2009
          • 1107

          #19
          i think i would love a canon machine without the clutches. Too much time to replace the clutches . With motor you can drive it till the drive shaft goes and there wont be timing issues much like xerox
          a machine is only as good as your tech : source:screwtape ; the scary one

          Comment

          Working...