If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
canon np 6551 paper jamming(overheating electromagnetic clutch and paper pick-up sol
need help for canon np 6551 that keeps on jamming evrytme i set it for continous copying,i've already replaced clutch but it keeps on overheating.
what is jam code ??
overheating on clutch/and or solenoid is due to short in wiring / trace wiring >look for pinched exposed to frame or break/ check your wall hot voltage to ground= should be 0v/0.05v.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment