3035,3245,4570 ect Drum & Fixing unit replacement

[Landshark]

I just had a fleet of these units dropped into my lap, can anyone please help me out with how to R&R the fixer and drum unit??

Thanks!!

[mrfixit51]

It is time for you to acquire a set of manuals for these, and the wisdom you seek is in those manuals...

[charm5496]

helping in your wisdom

fuser.pdfon the drum you have to open the right door and remove the front (screw inside toner cover and screw on the left top. You should see a rubber gromit or hole there) Door slides to left and comes off. Remove black screw from the blue handle and drop your developer. Remove silver screw from drum and slide out towards you.
Fuser instructions are attached

[Landshark]

You are correct, where can I acquire a manual and parts book for this model without being attached to a dealership ( The school district I work for decided to take the maint in-house) they just threw it in my lap.

Copier tech for 15 years btw, I just need a few tips for this family of boxes.

[Landshark]

[ATTACH]5913[/ATTACH]on the drum you have to open the right door and remove the front (screw inside toner cover and screw on the left top. You should see a rubber gromit or hole there) Door slides to left and comes off. Remove black screw from the blue handle and drop your developer. Remove silver screw from drum and slide out towards you.
Fuser instructions are attached

YES!!

Thank you!!!!!

[teckat]

For all your manual needs visit Tech Manual Archives
Contact me at john@techmanualarchives.com for your Firmware/Software needs.

Waste of time/ you have been reported to Administrator