ir7095 and copy control unit

[Guest]

I have a Canon ir7095 with an external copy control unit hooked up to it. Last week some techs were out to do maintenance and they bypassed the copy control unit (an Equitrac box); how can I re-enable it?

Thanks,
Greg

[teckat]

I have a Canon ir7095 with an external copy control unit hooked up to it. Last week some techs were out to do maintenance and they bypassed the copy control unit (an Equitrac box); how can I re-enable it?

Thanks,
Greg

CALL THE JERKS BACK/ guess they did it in service mode

[gkourik]

Yeah, still waiting for the callback. Anyone know the option to modify in Service Mode?

[SCREWTAPE]

In Service Mode make the following changes:

Equitrac installation

Level 2 > Copier>Option>ACC> CC-SPSW to "1"

For a Coin Box installation


Level 2 > Copier>Option>ACC> CC-SPSW to "1"

Level 1 > Copier>Option>ACC> Coin to "1"


(The LCD will now indicate Please Insert Coins)

[gkourik]

Didn't have a CC-SPSW in ACC. I'll just wait till the copier people get here.
Thanks anyway.

[teckat]

Didn't have a CC-SPSW in ACC. I'll just wait till the copier people get here.
Thanks anyway.

CC-SPSW should be there in Level 2 /Copier>Option>ACC
if not check in Level 1

they may have bypassed it under control panel with a short loop connector

[teckat]

Equitrac Embedded for Canon MEAP v2.0 for Equitrac Professional 5
and Equitrac Office/Express



• C5030, C5035, C5045, C5051

33.02

• 6055, 6065, 6075

33.02

• C7055, C7065

33.02

• 8085, 8095, 8105

33.02

• C9060 PRO, C9065 PRO, C9070 PRO, C9075 PRO

33.02

Equitrac Embedded for Canon MEAP v1.4 for Equitrac Professional 5
and Equitrac Office/Express

imageRUNNER • 2870, 2270
• 3045, 3035, 3030, 3025
• 3180, 2580
• 4570, 3570
• 5075, 5065, 5055, 5050
• 6570, 5570, 5070
• 7105, 7095, 7086
• 3245, 3235, 3230, 3225
• 105+, 9070, 8570, 85+, 8070
• C3170
• C3380, C2880
• C2380, C3480, C3580, C3080, C2550
• C5185, C5180, C4580, C4080
• C6870, C5870, C5058, C5068

imagePRESS • C7000VP
• C6000, C6000VP
• C1, C1+
Supported Card Readers

All formats on the Card Reader page are supported.
For quality purposes, we recommend confirming specific models, firmware versions
and Equitrac solution versions with your local Equitrac representative.

[SCREWTAPE]

I'll just wait till the copier people get here.
Thanks anyway.

I think that would be the right option.