system ir2220i

[bomberi]

hello! how are you
can someone help me with the system of the canon copier IR2220I. I Try to download it but for the last the file was damage it make me error 150 sun did not mach. File have been damage/lost when being transmitting.

[bomberi]

Thank you all. Ihave the system but the problem is the download. I've change the HDD and i begin to download the system at the half of downloading it make me error sun did not mach data are lost or suffered when beeing transmitted. But when i take the language, the rui,meap they will go well. The problem is only the system and it is 120MO. Thank you for help.

[teckat]

Thank you all. Ihave the system but the problem is the download. I've change the HDD and i begin to download the system at the half of downloading it make me error sun did not mach data are lost or suffered when beeing transmitted. But when i take the language, the rui,meap they will go well. The problem is only the system and it is 120MO. Thank you for help.

what does 120MO mean ???

[SCREWTAPE]

What version are you using.

SST v

Firmware v

[bomberi]

I use the sst 3.21 V and the system version is 60.03. 120mo is the capacity of the system so I want to know if my system is complet or no.

[teckat]

I use the sst 3.21 V and the system version is 60.03. 120mo is the capacity of the system so I want to know if my system is complet or no.

Make sure u have only ver of SST on Laptop !!!!!!!!!!!

that firmware v60.03a came with the SST v4.22Et included in the folder- Canon File Folder\SST System Software Folder\SST Files\-open your model folder u will see it there

before u install new SST v4.22Et/ uninstall old version/ then install new SST

then try to update firmware w/overwrite if or when prompted

The imageRUNNER 2220N / 2220i / 3320N / 3320i:
They have an internal 10 GB hard drive that is shared for copy/print/fax functions. The hard drive can hold approximately 3,700originals for copying and printing functionality.

[teckat]

hello! how are you
can someone help me with the system of the canon copier IR2220I. I Try to download it but for the last the file was damage it make me error 150 sun did not mach. File have been damage/lost when being transmitting.

SST ERROR 150
Hard Disk Format unsupported-error
Installed HDD model is not supported-

solution=
Install a supported Hard Disk/ or check if HD Format file is registered in SST under your model

The HD Format v00.11 file has been revised to v00.12 for the imageRUNNER 2220N/ 2220i/ 3320N/ 3320i copiers in which additional supported Hard Disk Drives have been added.

The imageRUNNER 2220N / 2220i / 3320N / 3320i:
They have an internal 10 GB hard drive that is shared for copy/print/fax functions. The hard drive can hold approximately 3,700originals for copying and printing functionality.
where did u get that HDD/


READ THIS PDF BELOW
SST_-_HDD_Not_Found.pdf

[bomberi]

thank you my problem is not the HDD because I've Win to format it the only problem is to download the system. my HD format file is the VXXxx0011 and i think that is ok. When i download the system it begin and at the half of the downloading it make me error so that is my problem. The error it make is: sun did not mach The data were lost/suffered while beeing transmitting, cheick the connexion between the pc and cable.

[teckat]

thank you my problem is not the HDD because I've Win to format it the only problem is to download the system. my HD format file is the VXXxx0011 and i think that is ok. When i download the system it begin and at the half of the downloading it make me error so that is my problem. The error it make is: sun did not mach The data were lost/suffered while beeing transmitting, cheick the connexion between the pc and cable.

Do not use>service mode> copier> function> system> download.

Instead of accessing download mode from the Control Panel service mode screen,
Do this>hold down "2" and "8" while powering on machine.
From this download mode the System Software should be able to flash without check sum errors.

[bomberi]

I 've done this way. the problem the connect is good and I've succed to format the Hdd. When i begin to the system it go well and at the half 52% of downloading it make error. But when i take the rui, the language,meapcon they go well but i have not a boot file in firmware.files are: G3fax,language,rui,meapcont,system, hdformat.

[teckat]

I 've done this way. the problem the connect is good and I've succed to format the Hdd. When i begin to the system it go well and at the half 52% of downloading it make error. But when i take the rui, the language,meapcon they go well but i have not a boot file in firmware.files are: G3fax,language,rui,meapcont,system, hdformat.

The Boot for 2220i is listed under the 2220N/ when u select Connect under iR2220/2820/3320
The Boot is the same for this series imageRUNNER 3320N/2220N/3320i/2220i


if u don't see 2220N on there - your Firmware is not Registered correctly/ u need to Remove it and re-install it

[bomberi]

Thank you I see on sst when I select the model IR2220:
IR2220
+G3FAX
+Hdformat
+Language
+Meapcont
+Rui
+System
IR2220N
+Boot
I think firmware is registered correctly.
If there is no IR2220N +Boot can it work?

[teckat]

Thank you I see on sst when I select the model IR2220:
IR2220
+G3FAX
+Hdformat
+Language
+Meapcont
+Rui
+System
IR2220N
+Boot
I think firmware is registered correctly.
If there is no IR2220N +Boot can it work?

if u select iR 2220N + BOOT and do not see a version number listed / u don't have your firmware registered correctly


what exactly are you trying to do with this HDD and Firmware and Printer
what is the issue - ERROR CODES/UPDATES ????/

[bomberi]

I don't undestand the issue of error codes updates?

[teckat]

I don't undestand the issue of error codes updates?

Simple/ What are you trying to do on this 2220i Printer ?????
are u replacing a HDD ?
are u trying to fix an Error Issue ??
are u trying to UPDATE the Currant Firmware ?
are u trying to overwrite the Currant Firmware ?

if u don't understand the ??'s about Errors and Updates / u are in the wrong Business/ or not a Tech.


confused.jpg