chinese language in ir 3045

[montana]

canon ir 3045 came with chinese language..how could i change it to english?
please help!thank you

[teckat]

canon ir 3045 came with chinese language..how could i change it to english?
please help!thank you

it depends if all the Language Firmware was installed/

Go to Service Mode, *, 2 and 8, *.
Select Copier.
Select Option.
Select Body.
Press the right arrow and scroll to the 3rd screen.
Select RMT-LANG. For English, it should read en.
To change the language, hit the +/- sign until you find the desired language.
Select OK.
Then power cycle the machine.

or check below>>>>

• Hit Additional Functions.
• Select Common Settings.
• Scroll down using the arrows.
• Select Language Switch.
• Select On and choose English. or What is available

[SCREWTAPE]

If what teckat suggested works out for you, very well.

If not, last resort would be to flash the machine with the eng-version.

[montana]

thanks gentlemen..i'll give it try.