iR7095 error E197-0000

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083
    #16
    Re: iR7095 error E197-0000

    Originally posted by canonclc
    Did you cure it .I have an ira 6055 with e197 -008
    ------------------------
    U should re-post under iRAD 6055- to receive better info


    iRADVANCE
    6075 / 6065 / 6055

    E197 -0008 = Error in Fixing Drawer Connector connection detection

    1.Check the connection between the Main Driver PCB (PCB2) and the Fixing Drawer.
    Main Driver side: J105, Fixing Drawer (host machine side):J3001D
    Check the Harness of the Fixing Drawer (Fixing side)(J3001L).

    2. Replace the Main Driver PCB (PCB2).
    ----- Connection between the DC Controller PCB (PCB1) and the Main Driver PCB (PCB2) is disconnected.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

      Comment

      • texascopy1
        Technician
        • Jan 2014
        • 29
        #17
        Re: iR7095 error E197-0000

        I ran accross this problem on 2 seperate 6075's after moving/shipping. The connector that the fuser/duplex assy fits into can get knocked out of position. Pull unit "all" the way out reach in to the connector on the machine frame and make sure it's set properly and making good contact. Worked for me both times.

          Comment

          Previous 1 2 template Next
          Working...