Help With IR7086

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • eng_usama
    Trusted Tech

    100+ Posts
    • Jan 2009
    • 115
    #1

    Help With IR7086

    please i want to know how to solve error code E000020-008?
    please Anyone can help me and if he can send me The Service Manual for this model
    Tags: code, e000, e0000, error, manual, mode, model, send, service, service manual
    • SCREWTAPE
      East Coast Imaging

      Site Contributor
      2,500+ Posts
      • Jan 2009
      • 3396
      #2
      E20-0008 When the toner feed motor (sub hopper) is driven, a fault is detected for 3 sec or more for the motor. Check the connector (J511) of the DC controller PCB. Replace the toner feed motor sub hopper; M22.
      Attached Files
      Last edited by SCREWTAPE; 10-18-2010, 11:56 PM.

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Originally posted by eng_usama
          please i want to know how to solve error code E000020-008?
          please Anyone can help me and if he can send me The Service Manual for this model

          to add on SCREWTAPES post>

          Check the paddle in the hopper assembly/ make sure is operating ok
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • eng_usama
              Trusted Tech

              100+ Posts
              • Jan 2009
              • 115
              #4
              Many thanks Guys

                Comment

                • SCREWTAPE
                  East Coast Imaging

                  Site Contributor
                  2,500+ Posts
                  • Jan 2009
                  • 3396
                  #5
                  No problem. Let us know.

                    Comment

                    Previous template Next
                    Working...