IR 3300 panel screen doesn't display( green light shown)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rionwwm
    Technician
    • Feb 2010
    • 13

    #1

    [Misc] IR 3300 panel screen doesn't display( green light shown)

    i have a machine that the display screen doesn't light on when turns on the machine. but the machine mechanism functions, including the green light at the panel. i tried changed main controller board( with sdram, flash dimm) and a dc controller board from other machine but still doesn't work. when i change it back to the machine that used to functions properly, it's display screen also doesn't light up. why??????????????????????????????????????????????? ??????? weird case.
  • D_L_P
    Self Employed

    1,000+ Posts
    • Oct 2009
    • 1196

    #2
    It sounds like corrupt system software, bad HDD or RAM. Try reseating the RAM and Boot ROM and reinstall system software before replacing any parts.


    Clipboard01.jpg

    Comment

    • costd
      Technician

      250+ Posts
      • Jan 2008
      • 409

      #3
      If it makes copies - check the LCD and/or the inverter board.

      Comment

      • badboys
        Technician
        • Oct 2010
        • 69

        #4
        I had to replace the whole control panel assy once. Dismantle the faulty one like yours, just to find out there is orange juice spill & sipped into the touchscreen...

        Comment

        Working...