ir 2550

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • molson
    Technician
    • Feb 2008
    • 41
    #1

    ir 2550

    how do i replace drums in canon 2550
    Tags: 2550, 550, canon, drums, manual, replace, replace drums, service, slide, unit, user
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Originally posted by molson
      how do i replace drums in canon 2550

      hate to say this/ get a manual/ or place a service call

      Drums are installed with a procedure to follow/ if u never did this/ u better call a service person/ u can damage your ITB unit if u don't call for help
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • SCREWTAPE
          East Coast Imaging

          Site Contributor
          2,500+ Posts
          • Jan 2009
          • 3396
          #3
          Originally posted by molson
          how do i replace drums in canon 2550
          Its really not that complicated. Its two screws and you slide the processing unit out. Here's a video.

          Good luck.

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Originally posted by SCREWTAPE
              Its really not that complicated. Its two screws and you slide the processing unit out. Here's a video.

              Good luck.


              YouTube - 3380 install


              Good video, seen it before

              I still think u need some hands on first, especially for an End User !!
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • SCREWTAPE
                  East Coast Imaging

                  Site Contributor
                  2,500+ Posts
                  • Jan 2009
                  • 3396
                  #5
                  Originally posted by teckat
                  I still think u need some hands on first, especially for an End User !![/B]
                  I agree.

                    Comment

                    Previous template Next
                    Working...