laser class 730i blank display

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lightningjeremy
    Trusted Tech

    100+ Posts
    • Jul 2009
    • 139
    #1

    laser class 730i blank display

    i have an lc 730i with a blank display. other than the display being blank the machine seems to operate fine. can just the lcd be replaced or is it part of a bigger assembly? thanx
    Tags: 730i, assembly, blank, class, display, forgot, laser, lcd, part, replaced
    • mrfixit51
      Lead Service Technician

      1,000+ Posts
      • Oct 2008
      • 1975
      #2
      Op panel assembly is the way I would go, 3 screws, 1 connector.
      "Once a King, always a King, but once a Knight is enough!"

        Comment

        • zoraldinho
          teacher-guide-expert-guru

          Site Contributor
          5,000+ Posts
          • Mar 2008
          • 5000
          #3
          Originally posted by lightningjeremy
          i have an lc 730i with a blank display. other than the display being blank the machine seems to operate fine. can just the lcd be replaced or is it part of a bigger assembly? thanx

          Little help.Snap2.jpg
          If it ain't broke, don't fix it
          A picture is worth a thousand words

            Comment

            • zoraldinho
              teacher-guide-expert-guru

              Site Contributor
              5,000+ Posts
              • Mar 2008
              • 5000
              #4
              I forgot part number.

              LCD UNIT HH7-2683-000
              If it ain't broke, don't fix it
              A picture is worth a thousand words

                Comment

                Previous template Next
                Working...