Suddenly getting blank pages

[davidj7]

amen

[teckat]

There is only one word for this poster



1. Refuse to take notice of or acknowledge; disregard intentionally

MessageBoxWorkingIconAbortRetryIgnoreButton.PNG

[tinnyjay]

I just started getting only blank pages from my Canon. I have no idea what happened to caused this.

However, to save even more money on my last refill I refilled the black cartridge with cacao powder, the cyan with blueberry powder, the magenta with beet powder, and the yellow with turmeric powder (I realize the colors might be a bit off but it should compensate for this during calibration right?). I made sure they were all ground finely enough to not cause any problems. Of course these wouldn't melt onto the paper as they get fused, so I took white plastic pellets and ground them into a fine powder and did about a 1:5 mix of ground plastic to colored powder for each which should be more than enough to properly fuse the colors.

Any idea why I'm getting blank pages?

Problem with firmware i think
You must programm ur copier to work in kitchen

[mrwho]

I think it's the user firmware - I'd rewrite it with a hammer and a chisel.

[tinnyjay]

I think it's the user firmware - I'd rewrite it with a hammer and a chisel.

Lol,you're right