ir advanced 5035

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • antmantbone
    Technician
    • Oct 2010
    • 10
    #1

    ir advanced 5035

    Hey,

    We have a irAdv 5035 That we needed to plug into the network, there are no link lights coming from the machine, however it was on the network at some point. We did have to reboot all to factory defaults to get rid of an admin password. Do we have to re-enable the nic?

    Thanks in advance.
    Tags: 5035, admin, admin password, defaults, network, nic, password, plug, work
    • antmantbone
      Technician
      • Oct 2010
      • 10
      #2
      For those who might see this in the future - the link lights are not coming on still, but a restart after the network settings were changed solved the issue.

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Bright idea.jpg

          Way to go, put it in tha' Books
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            Previous template Next
            Working...