IR6000dn

[ar6565]

Yesterday I installed a new system (USenv8103) to the IR6000dn by the SStv4.04e and the installing process was complete.
But the copier language didn't change to English language (still Italian).
What is wrong with me.
Should I install the boot or rui or Format . . . should I do something from the copier service mode *28*.
Please help.
Thanks

[teckat]

Yesterday I installed a new system (USenv8103) to the IR6000dn by the SStv4.04e and the installing process was complete.
But the copier language didn't change to English language (still Italian).
What is wrong with me.
Should I install the boot or rui or Format . . . should I do something from the copier service mode *28*.
Please help.
Thanks

Try below>>

• Hit Additional Functions.
• Select Common Settings.
• Scroll down using the arrows.
• Select Language Switch.
• Select On and choose English.

To Select the Desired Language:
1. Go to Service Mode, *, 2 and 8, *.
2. Select Copier.
3. Select Option.
4. Select Body.
5. Press the right arrow and scroll to the 3rd screen.
6. Select RMT-LANG. For English, it should read en.
7. To change the language, hit the +/- sign until you find the desired language.
8. Select OK.
9. Then power cycle the machine.

[ar6565]

Pls Note: That Common Settings dosen't has "Language Switch"
It has only the following:

Initial Functions
Auto Clear Setting

Audible Tones

Inch Entry
Drawer Enigibility For APS/ADS

Store Paper Type
Energy Saver Mode
Function Key Wake UP

Energy Consumption in
Sleep Mode
LTRR/STMT
Originals Selection
Tray Designation
Printing Priority
Manual Paper Standard Settings
Local Printing Standard Mode

Initializing Common Settings

[Peter Sim]

Just follow what teckat had say:


To Select the Desired Language:
1. Go to Service Mode, *, 2 and 8, *.
2. Select Copier.
3. Select Option.
4. Select Body.
5. Press the right arrow and scroll to the 3rd screen.
6. Select RMT-LANG. For English, it should read en.
7. To change the language, hit the +/- sign until you find the desired language.
8. Select OK.
9. Then power cycle the machine.

The language will change to english.

[teckat]

Pls Note: That Common Settings dosen't has "Language Switch"
It has only the following:

Initial Functions
Auto Clear Setting

Audible Tones

Inch Entry
Drawer Enigibility For APS/ADS

Store Paper Type
Energy Saver Mode
Function Key Wake UP

Energy Consumption in
Sleep Mode
LTRR/STMT
Originals Selection
Tray Designation
Printing Priority
Manual Paper Standard Settings
Local Printing Standard Mode

Initializing Common Settings

Sorry about that Common Settings on a 6000dn, thinking of a different model
Check here also
SERVICE MODE
COPIER>OPTION>CONFIG
Use it to select multiple pieces of firmware retained on the hard disk so as
to make appropriate settings: country, language, model, paper size series.
Settings XXYYZZAA XX: country (JP), YY: language (ja), ZZ (00); model,
AA (00): paper size series; display will be in the following sequence and
the parentheses indicate default settings:
COPIER>DISPLAY>USER>LANGUAGE.
Using the Mode
1) Select CONFIG.
2) Select an item (to highlight), and press the +/- key to scan through
the items.
3) When the appropriate setting has appeared for each item, press the
OK key.

COPIER>OPTION>BODY>RMT-LANG
Use it to switch the language for remote UI driven over the WEB.
Use it to select a language code (ja, en, etc.) to identify the site; expressed
as in service mode
(COPIER>DISPLAY>USER>LANGUAGE).
Using the Mode
1) Select RMT-LANG.
2) Each press on the +/- key brings up a different language code.
3) When the desired language code has appeared, press the OK key.

[ar6565]

It has changed.
Many thanks, MR. Teckat.

[teckat]

It has changed.
Many thanks, MR. Teckat.

HatTip_2.jpg

thanks, and good luck