If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
After the installation of a new machine is shown CODE E-748-2000. There is a strange sound from the HDD. Suspect the failure of HDD.Any suggestions?Thanks for the help.
Yes, e-support says replace the HDD. Kind of a strange code for a new machine. Since it is new contact the place you purchased it from as it will be under warranty and not cost you anything to have it fixed.
After the installation of a new machine is shown CODE E-748-2000. There is a strange sound from the HDD. Suspect the failure of HDD.Any suggestions?Thanks for the help.
Go in and check the HDD Connections/ In fact remove back panel & check all PCB's & connections & Main Controller
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment