canon ir 2018 stacbypass malfunction

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • montana
    Trusted Tech
    • Aug 2008
    • 392
    #1

    canon ir 2018 stacbypass malfunction

    hi guys..i have aproblem with stackbypass multifeeder in canon ir 2018
    it doesn't work ..i can see the roller rotate but the feedig plate doesn't lift up..is there any adjustment to do
    i apreciate any help guys
    thank you & happy new year
    Tags: 201, 2018, adjustment, aproblem, canon, dropped, lift, malfunction, plate, roller, stacbypass, work
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      5,000+ Posts
      • Mar 2008
      • 5015
      #2
      Originally posted by montana
      hi guys..i have aproblem with stackbypass multifeeder in canon ir 2018
      it doesn't work ..i can see the roller rotate but the feedig plate doesn't lift up..is there any adjustment to do
      i apreciate any help guys
      thank you & happy new year
      There is no adjustment.You have an issue.Usually strange subject dropped inside like coin...

      happy new year
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • Swea001
          Junior Member
          • Dec 2010
          • 5
          #3
          Hi, u replace side door

            Comment

            Previous template Next
            Working...