cannot enter to service mode canon iR3220 
cannot enter to service mode canon iR3220i peress * 2&8 * in key canon iR3220 about not entr
why?
help me plze
-
cannot enter to service mode canon iR3220
cannot enter to service mode canon iR3220
i peress * 2&8 * in key canon iR3220 about not entr
why?
help me plze -
Persevere!
1) Press the asterisk key (Addnl Funct) on the operation panel.
2) Press 2 and 8 simultaneously on the numeric keypad.
3) Press the asterisk key (Addnl Funct) on the operation panel.
Sticky keypads can give you an irksome time to enter the mode. I have had some that were quite irritating to get to work. On some other models it is possible to switch the entry mode to 4&9 I believe, but I searched the manual and could not see that feature on this model.
Persevere!"Once a King, always a King, but once a Knight is enough!"
-
**Knowledge is time consuming, exhausting and costly for a trained Tech.**Comment
-
additional function >>
2 and 8 simultaneously (press and hold maybe for about 2-3seconds) >>
additional function.
i do this sometimes for hard headed control panel (",)Comment
-
post was three weeks ago,
Head-Bang.JPG**Knowledge is time consuming, exhausting and costly for a trained Tech.**Comment
Comment