Canon GP225 with defect Harddrive

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • thomas_gruber
    #1

    [Misc] Canon GP225 with defect Harddrive

    Hello,

    I have a GP 225 with defect HDD. What Tools do I need when replacing the drive?
    Tags: 225, canon, defect, drive, gp225, hdd, screwdriver, sst, system, tools
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      5,000+ Posts
      • Mar 2008
      • 5000
      #2
      Screwdriver and SST.
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • thomas_gruber
          #3
          Originally posted by zoraldinho
          Screwdriver and SST.
          Screwdriver(s) are not really the problem. I have read that the sst is the necessary tool, but I do not know, which version I have to use. The second question is: Do I need the system software for the Network/Printer Board?
          Where can I get it?

          Thank you!

            Comment

            • seniortech
              Trusted Tech

              100+ Posts
              • Dec 2007
              • 180
              #4
              Not sure if the SST will work with this machine as I have never tried it, a few years since I have seen one of these machines but to load the system software onto the controller you needed the PDL downloader, parallel cable and system software which comprised of the boot files PCL and PS code which all have to be downloaded to the controller via the PDL tool and parallel cable, takes about 45 mins...

                Comment

                • toantam
                  Technician
                  • Nov 2007
                  • 63
                  #5
                  First you have to have PDL downloader, parallel cable, system software. But you have to check the flash rom on IP board
                  Good luck.

                    Comment

                    Previous template Next
                    Working...