sir,
i have 1 new machine install finisher have error code E716
who know what the problem!!!!
TQ
i have 1 new machine install finisher have error code E716
who know what the problem!!!!
TQ
-
-
E716 0000
Erroneous communication with optional cassette or 2-way unit
Description:
After the presence of a cassette pedestal or a 2-way unit has been detected, the communication fails to be normal for 5 sec.
Remedy:
1.Check the cable.
2.Replace the DC Controller PCB (PCB4).
3.Replace the Cassette Pedestal Driver PCB.
4.Replace the 2-way unit driver PCB.
--------
E716 0010
Failure of the communication with the 2-way unit
Description:
When the communication with the 2-way unit is faulty after detecting the connection with the finisher.
Remedy:
1.Install the 2-way unit.
2.Check the cable.
3.Replace the DC Controller PCB (PCB4).
4.Replace the 2-way unit driver PCB."Once a King, always a King, but once a Knight is enough!"
Comment