[Misc] IR4570 Trip-off during printing

[boyjorge]

Good Day,

Having problem with IR4570 during printing only. The machine was tripping-off during printing.

I already replaced DC controller and Power Supply but the same problem occured. I also re-configured the hard disk but still.

Any help would be appreciated.

Thanks.

[teckat]

Good Day,

Having problem with IR4570 during printing only. The machine was tripping-off during printing.

I already replaced DC controller and Power Supply but the same problem occured. I also re-configured the hard disk but still.

Any help would be appreciated.

Thanks.

Check>
Additional functions>System Settings>Network settings>TCP-IP>Multicast Discovery and setting it to "off" (default is "on").

remove / clean ends/ re-seat memory or replace-swap if available

what are error codes listed in service mode ??

[boyjorge]

Sir, there is no error code display and no error code in service mode. One thing also, i noticed that during machine standby the LCD display hang and in a few seconds, the machine trips off and on. I will try swap the memory and i will tell the result.

Thanks.