The mystery of the iR7105 V1

[Dimacop]

I have two iR7105 V1
(occurs in two iR7105)
one occurred E602
I changed the hd nothing done (perfect for this hd tested and installed on another machine)
When I put on my machine
E602 Direct
and when I press the * 2 8 *
he first of E602
before download mode
using the sst
the hd format error
not communicate with the hd
now the two of
even putting the hd with the system installed on another machine
at first I invert the two boxes (main control)
Is this the beginning of the problem
someone already seen this

[Dimacop]

I Can Do

remove the battery from the main control
to see if it restarts the PCB ?????

I think it was reversed because the control card in iR7105
I put the main control (A) in the machine (B)
I put the main control (B) of the machine (A)
later the error occurred

This may have been my mistake?

[developer dumper]

why would you not update to V2 machine?

[tinnyjay]

I have two iR7105 V1
(occurs in two iR7105)
one occurred E602
I changed the hd nothing done (perfect for this hd tested and installed on another machine)
When I put on my machine
E602 Direct
and when I press the * 2 8 *
he first of E602
before download mode
using the sst
the hd format error
not communicate with the hd
now the two of
even putting the hd with the system installed on another machine
at first I invert the two boxes (main control)
Is this the beginning of the problem
someone already seen this

Could be a problem like this,but i do not know if this is allowed at IR7105
Check it :
http://www.copytechnet.com/forums/ca...-itf-list.html

[teckat]

I Can Do

remove the battery from the main control
to see if it restarts the PCB ?????

I think it was reversed because the control card in iR7105
I put the main control (A) in the machine (B)
I put the main control (B) of the machine (A)
later the error occurred

This may have been my mistake?

what exactly are u trying to do ??
how many HDD's are playing around with/ do both machines have an issue ?

Try and perform these HD Clears /go into service mode COPIER>FUNCTION>SYSTEM Select CHK-TYPE and set it to 1 and press ok.
Then select HD-CLEAR and press ok.
Select CHK-TYPE and set it to 2 and press ok.
Then select HD-CLEAR and press ok.
Select CHK-TYPE and set it to 3 and press ok.
Then select HD-CLEAR and press ok.
Select CHK-TYPE and set it to 4 and press ok.
Then select HD-CLEAR and press ok.
After completing this procedure, power cycle the imageRUNNER and re-enter any user settings. If the error still occurs format the Hard Drive with the Service Support Tool and reinstall the System Software.

[nickkei]

Try to change the boot room,i had this problem last week,tried everything but not avail,at last change boot room,problem solved

[Dimacop]

what I have done
tested on another machine
dimm
bootrom
hd
everything working perfectly
when you put on my machine
my two machines
E602 error again
how to upgrade a machine from V1 to V2?
I have firmware v1 and v2
but never installed
V1 V2 system

even getting into the download mode
I can not do the installation

and I do not have access to the service mode
installing it on another machine.
the system works perfectly in my not
I'm afraid to try on another machine and another with the same problem

[teckat]

if u tried the<
dimm
bootrom
hdd, on another 7105 and did not receive an error 602,

u have another issue,and it's not firmware related

[Dimacop]

I have some pictures of the problem.

http://img819.imageshack.us/i/28032011077.jpg/

http://img543.imageshack.us/i/28032011081.jpg/

http://img858.imageshack.us/i/28032011083.jpg/

http://img545.imageshack.us/i/28032011086.jpg/

Already tested the hd and it is working

the model of hdd that came in the machine
MHV2040AH believe that this model has the hd format
I'll try today with a Toshiba MK4026GAX

when I try to enter the download mode
stays on the screen the two
download mode and E602-001
never see it

the machine has all the information to be a version V1
but in SST and that she mosta a V2 version
more when I try to install the firmware on Error
in HD format.

[teckat]

If u tested this HDD in another 7105 and it boots up /and functions with no errors.

u have a bigger issue to deal with on 7105

make sure u have only ONE Ver. of the SST on Laptop

[tinnyjay]

what I have done
tested on another machine
dimm
bootrom
hd
everything working perfectly
when you put on my machine
my two machines
E602 error again
how to upgrade a machine from V1 to V2?
I have firmware v1 and v2
but never installed
V1 V2 system

even getting into the download mode
I can not do the installation

and I do not have access to the service mode
installing it on another machine.
the system works perfectly in my not
I'm afraid to try on another machine and another with the same problem

I would suggest to disconnect printer board.

[Dimacop]

the printer board
and onboard

[Dimacop]

apparently the problem is in the dc control
send to concert
eventually put the result

[Dimacop]

Hello friends
Thanks to assistance from all
discovered the defect iR7105
was on the main board (two boards with the same defect)
I got a third that had the same problem (and lucky)
Yesterday with a fourth main board the machine worked perfectly.
Thank you all

[teckat]

Hello friends
Thanks to assistance from all
discovered the defect iR7105
was on the main board (two boards with the same defect)
I got a third that had the same problem (and lucky)
Yesterday with a fourth main board the machine worked perfectly.
Thank you all

did these Boards have a repair TAG on them ??
if so ,where was repaid done ? & what company ?

or were these Canon new OEM Boards ??