Canon 3035 config question about finisher options

[Simons]

EDIT

Removing s1 finisher from 3035 and installing inner two way tray with j1 tray. My guess is that I dont need some extra 3 way unit installed to allow the j1 tray to function.
Does anyone know for sure? thanks!

[teckat]

u can not install an inner two way tray D1 with a S1 Attached

u can put on an Additional Finisher tray B1 with the Finisher S1 installed


take a look at this>>
Canon Configurator

[charm5496]

with the S1 installed you will need the copy tray J1 which hangs off the right door at the top and the additional finisher tray B1

8815A001AB copy trayJ1
9565A001AA additional tray B1

[teckat]

The End..jpg

[Simons]

No thats not what I meant, sorry for confusion.

I am going to be buying a machine that has a s1 in it. The S1 FN will then have to be removed and i will install a two way tray.

My job is to get the copier back to looking like it never had a s1 finisher and the 2 way kit installed with fax jobs going out to the j1.
inner two way tray d1 9562a001aa
copy tray j1 8815a001aa

Again sorry for the confusion there. Ill check config file THANKS !!!!

[Borsody75]

See the install protocol of the Finisher S1 which I attached.
On the page 13 you can see parts which will no loner be needed
once the finisher has been installed.
If you remove the finisher, the laser unit and hopper won't have cover!!!