If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Did this code happen during printing ??
Check interface cable from Fiery{imagePass}to printer
Remove the memory DIMMS in printer/clean and re-seat them.
Make sure all your interface cables are sitting correct
make sure the printer is turned off & power plug removed from wall outlet/ when re-seating cables or interior work
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment