iRADV5045

[KL568]

Hi, All

Have anybody encounter this error "Applicable firmware is not registered" while doing firmware upgrading via CDS?

[zoraldinho]

Hi, All

Have anybody encounter this error "Applicable firmware is not registered" while doing firmware upgrading via CDS?

Use latest SST and install latest firmware.Probably you skip some part of system.

[turkeyfoot]

Ill take a stab at that. Ive use cds to appy firmware at fedx. When its not at the machine, the content delivery service will still list firmware that is available though it isnt "yet" at the machine. Youre better off going the usb or sst route if you can because Ive downloaded it from the server and it takes an inordinate amount of time, something on the scale of 1 hr 20 min. Course you could always set it up to deliver it at a specified time and come back and do it.

[KL568]

Agreed about time consuming via CDS as I had done a few units. But a few of my sites has restrictions on bringing SST/USB drive but has Internet access, so I tried it but did not even reach the step where a list of firmwares can be choose and it give that error message.

Have compare P-print of those successful unit via CDS but could not find any difference. Thought anybody might have came across the same error and help me out.