If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
the copy/fax/scan lights all lit green. process data lit green, error lit red and the lcd is blank. It will print but will not copy or fax. any thoughts? thanks, Bri Ski
the copy/fax/scan lights all lit green. process data lit green, error lit red and the lcd is blank. It will print but will not copy or fax. any thoughts? thanks, Bri Ski
u mean a 4570?? unplug the Fax board> power up printer-see what happens
can u get in service mode to see ERROR ?
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment