Canon Gp405: Print Out Problem

[xtraez]

Hi,
Please help me in this issues. It happen during runing production.


scan 002.jpg



Below zoom in from the above picture.
scan zoom.JPG

[mrfixit51]

It is digital in nature, that is for sure, so laser or IP board comes to mind...

[zoraldinho]

Maybe it's time for new copier!

[pramod]

check in service mode if test print is ok and facing problem in copying only , just check CCD ,as i also faced similar problem .

[xtraez]

I pust blank paper on the glass and scan, this the output print out. I use the blank tu confirm the print out issue.

[xtraez]

Thank your advise. I will check again today.

[xtraez]

Maybe it's time for new copier!

Hahahaha... I love Canon Copier.

[Peter Sim]

Change the CCD unit

Hahahaha... I love Canon Copier.

[Herrmann]

First at all, you have to make sure if the problem comes out of the printing engine or if its a scanner issue.
Go into service mode, then Function--->DENS---->PD-DENS---->press "Start"
If the resulting Print is ok, then you have a scanner issue, if not , its the print engine, here i would guess a laser issue

[zoraldinho]

Hahahaha... I love Canon Copier.

I also love my wife but i still won't younger.

[xtraez]

One million thanks to you all.
I do check the action that you given, i found the issue is coming from the CCD unit.

Thank you so much team.
**Sharing is Caring**

[xtraez]

Change the CCD unit

Hi Peter.. Which part of Penang do you live? Can i have your contact number.

Thank you.

[dhanesh]

hey try to repair ur machines CCD unit or check CCD ribbon cable

[xtraez]

hey try to repair ur machines CCD unit or check CCD ribbon cable

Hi Dhanesh.
Thank for the advise.
I will check the ribbon canle, since no smell burning on component side.

thanks.