ir5075

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jose dai
    Technician
    • Dec 2008
    • 25
    #1

    ir5075

    error e061-01,change dc controller,pot. control pcb and sensor, but the error stil
    Tags: change, controller, dc controller, e061, error, ir5075, pcb, roller, scanner, sensor
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      5,000+ Posts
      • Mar 2008
      • 5001
      #2
      Originally posted by jose dai
      error e061-01,change dc controller,pot. control pcb and sensor, but the error stil
      ir6570-012.pdf

      It's not the same machine,but this is it.Good luck.
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • SCREWTAPE
          East Coast Imaging

          Site Contributor
          2,500+ Posts
          • Jan 2009
          • 3396
          #3
          You can try the primary corona assy next.
          Worst case, a bad scanner unit. AKA(Laser)

            Comment

            • zoraldinho
              teacher-guide-expert-guru

              Site Contributor
              5,000+ Posts
              • Mar 2008
              • 5001
              #4
              Screwtape rise from the dead.Where are you so long dude.
              If it ain't broke, don't fix it
              A picture is worth a thousand words

                Comment

                • satitjangdee
                  Technician
                  • Jun 2011
                  • 49
                  #5
                  Re: ir5075

                  Originally posted by zoraldinho
                  [ATTACH]9789[/ATTACH]

                  It's not the same machine,but this is it.Good luck.



                  Great. I experienced in this, I will try to check.
                  q35.gif

                    Comment

                    Previous template Next
                    Working...