Reg issue in the sub scanning direction in IRC 5180

[teckat]

Your best bet is to get a Trained Canon tech to inspect the issue>u need a reload of the full firmware package.
who ever did this refurb/ is a jerk-

U can't buy Firmware online.

HEAVY STOCK -as I stated before causes the Drum Drive motor to crap out with that many prints u posted, it's the clock pulse motor the miss-functions with the switch over speed between Plain paper & Heavy Stock.

[Tricky]

Ain't you mysterious !!!

Pm sent I hope you appreciate why I am mysterious

[V-P]

Pm sent I hope you appreciate why I am mysterious

my bet !

take-a-bow-thumb3083579.jpg

[teckat]

bologna.jpgCall for a trained CANON tech. and stop wasting our time .

[digitalbrain]

I have found this document to be very usefull in solving this issue

http://www.luckylucas.co.uk/irc5180_Color_Shift_Prevention%20_&_Correction.pdf

http://www.luckylucas.co.uk/CLC5151%...Feb%202011.pdf

Very useful Canon Tech. Thanks a lot

DB

[digitalbrain]

[ATTACH=CONFIG]9876[/ATTACH]Call for a trained CANON tech. and stop wasting our time .

Sorry for wasting your time teckat

DB

[teckat]

take the information posted for your issue, and follow some type of procedure -
good luck