Register Firmware

[Dedy.P]

Hi..
i have register firmware iR9070 or iR8070 to SSTv433Ez, but becomes invalid (red word) in job of SST
but when i downgrade to SSTv411E in fine (black word), any idea?

[Dedy.P]

please,can anyone help me, that got same experience with my problem ?

[Joe Karanja]

Dedy,i do'nt realy understand your problem.After trying to register the firmware under SST 4.1 is it working or still not working.If not your firmware is corrupted.

[Dedy.P]

Dedy,i do'nt realy understand your problem.After trying to register the firmware under SST 4.1 is it working or still not working.If not your firmware is corrupted.

when i register the firmware under SST 4.1 is working, but after i change the SST to v433, the firmware becomes invalid.
maybe you're correct, my firmware is corrupted

[ymmtech]

Corrupted files were the blame?
Canon have made it easy, all the .prg, .dat, .ift files came with check sum.
eg
This file:ir2200-usen4501-5af7.prg. has 16bit check sum of 5AF7
This file:iR8070-XXde1301-C76D-RUI.dat has 16bit check sum of C76D
Have mentioned how to check sum. http://www.copytechnet.com/forums/ca...tml#post104743
I am quite sure u got 0 corrupted file, neither a corrupted Zipped file, but more likely an old version firmware. So, if u got a latest one, share with me, Boleh pak?

[bosty171]

I had problems upgrading IR8070 with SST 4.xx
Use older SSt and upgrade is OK and machine works fine.