ir3570 reader problem

[rajmer]

Hi!
I have a problem with my Canon IR 3570,when i put the originals in the dadf for one sided copy only,the feeder always scan double sided.If anybody have problems like that please advise me.
THX

[teckat]

Hi!
I have a problem with my Canon IR 3570,when i put the originals in the dadf for one sided copy only,the feeder always scan double sided.If anybody have problems like that please advise me.
THX

Disabling idle feed mode on single sided copying through the DADF-
When single side copying through the DADF, the original will cycle twice (idle feed) before being delivered.

To disable this function, enter service mode level 2 > COPIER > OPTION > BODY ><SCANSLCT set to "0">. This will cause the original to cycle once and be delivered.


also++++

If u are using different/mixed size originals

Check the setting under COPIER>OPTION>BODY>LEVEL 2>SCANSLCT. (*28*-in level 2 (*2 )
COPIER>OPTION>BODY>SCANSLCT.) There are two settings available.
0: OFF (Determining the scan area by document detection)
1: ON (Determining scan area by paper size)
If the setting is "1" the feeder will scan the original twice. Set to "0" for single scanning.

[rajmer]

Thanks for the advice i will try to fix the machine tommorow and let you posted

[rajmer]

i fix the problem thanks TECKAT

[teckat]

i fix the problem thanks TECKAT

thanks~~~~~~~~~~~~~~~