HDD Clear type4 'NG'

[Peter Sim]

Hai all,Need help and info.
I try HDD type4 check was ok
but when i clear HDD type4 was NG.
What cause to this problem?
But the machine was operating find without any problem.

Thank you in advance.

[teckat]

Hai all,Need help and info.
I try HDD type4 check was ok
but when i clear HDD type4 was NG.
What cause to this problem?
But the machine was operating find without any problem.

Thank you in advance.

U can't clear check-type 4 on control panel-
4: firmware, address book, filter storage area → no operation occurs (to
initialize, use the SST)

what printer model ???

why are u doing HDD Checks ?? what was your issue ?

NG = means Hardware issue

[Peter Sim]

Sorry forgot to write the model ,is ir2870.
Sometime error code e602 appear,clear log(type2),when send printing slow.
I will doing all 4 type HDD check for the above problem.

U can't clear check-type 4 on control panel-
4: firmware, address book, filter storage area → no operation occurs (to
initialize, use the SST)

what printer model ???

why are u doing HDD Checks ?? what was your issue ?

NG = means Hardware issue

[teckat]

Ok different animal !!!
- HD-CHECK
If the power is cut while data is being written to the HDD, the occurrence of a write-suspended sector is a possibility.
When HD-CHECK is run on such a sector, repairs will be made, but all data in the sector will be lost. A write suspended sector may be repaired only by HDD-CHECK (0); if not TYPE-TYPE=0, the task will be limited to an FS level check.

If the write-suspended sector happens to be a critical sector that holds a control area, there is no way of repairing it; you will have to execute HDD formatting-and reload firmware

[vigour]

It seems to be standard for type 4 and 6 to say NG.
I tried it on two 6055's this morning and got the same result (NG).

Teckat this is in relation to my e315--details in the relevant post.

[teckat]

It seems to be standard for type 4 and 6 to say NG.
I tried it on two 6055's this morning and got the same result (NG).

Teckat this is in relation to my e315--details in the relevant post.

A e315 on iR2870 is image data error/ similar issue on iRAD

[ymmtech]

HDD Clear type4 'NG' Sometime error code e602 appear,clear log(type2),when send printing slow.

Normally I will change the HDD, and check the old HDD status later.