E583 error code.
The Auxiliary tray on the K series Finisher is not moving at the specified time.
Most of the time the Auxilary tray is stuck and needs to be corrected. Check for binding on Auxilary tray. Check operation of M6 and confirm the motor has 24 volts to operate at J105 A-5. When the Auxilary tray is detracted the sensor (*1), PI11 goes high at J105 B-6. Note(*1) The troubleshooting in the K4/3 manual points to PI10. PI11 is the correct AUXILIARY Tray sensor photo interrupter.
The Auxiliary tray on the K series Finisher is not moving at the specified time.
Most of the time the Auxilary tray is stuck and needs to be corrected. Check for binding on Auxilary tray. Check operation of M6 and confirm the motor has 24 volts to operate at J105 A-5. When the Auxilary tray is detracted the sensor (*1), PI11 goes high at J105 B-6. Note(*1) The troubleshooting in the K4/3 manual points to PI10. PI11 is the correct AUXILIARY Tray sensor photo interrupter.
Comment