[Error Code] IR7105 machine "finisher cannot be used"

[tomson25]

"Finisher cannot be used " message on IR7105 machine,In error history there are two error codes in a day E0568-8001 & E0583-8001. If anybody experience this problem please let me know.


Thanks

[zoraldinho]

First try to reconnect connectors on finisher controller PCB.Check last jam codes and inspect jam area.If you have(reset limited func.mode)

[gensys]

"Finisher cannot be used " message on IR7105 machine,In error history there are two error codes in a day E0568-8001 & E0583-8001. If anybody experience this problem please let me know.


Thanks

Turn off mashin
Reconect finisher
Turn on.
Reset limited func.mode or initialize All
Set all old additional function your mashin
Connect finisher cabel
I think it will help...