Hi All,
I have a Canon IR2018n copier. The print and copy output is very light. Adjusting to the darkest setting could only darken a bit. I have replaced the drum unit and the toner (both new) with the same result. This copier was in my stock room for 7 months unused, and had accumulated dust.
Any ideas?
I have a Canon IR2018n copier. The print and copy output is very light. Adjusting to the darkest setting could only darken a bit. I have replaced the drum unit and the toner (both new) with the same result. This copier was in my stock room for 7 months unused, and had accumulated dust.
Any ideas?