Error code E0001-0010,E0001-0001 displaying ir 6570

[dhanesh]

Error code E0001-0010,E0001-0001 displaying CANON ir 6570

fixing unit, mother board and main power supply replaced
Error still in machine
please help me to fix it.. Thanks in advance.......

[zoraldinho]

Re: Error code E0001-0010,E0001-0001 displaying ir 6570

Replace thermistors

(COPIER>FUNCTION>CLEAR>ERR)

[timpu]

Re: Error code E0001-0010,E0001-0001 displaying ir 6570

if fault keep recurring with same error e001 -000 try replaceing fuser inlet guide solonide located next to t/bed hahdle

[Brian8506]

Re: Error code E0001-0010,E0001-0001 displaying ir 6570

Dumb question but did you reset the error in service mode

[pjdbm]

Re: Error code E0001-0010,E0001-0001 displaying ir 6570

Lower roller and bearings , clean all that rust dust away,c lean all sockets with electronic cleanner

[Brian8506]

Re: Error code E0001-0010,E0001-0001 displaying ir 6570

Bushings on upper roller have given me E0001 codes

[charm5496]

Re: Error code E0001-0010,E0001-0001 displaying ir 6570

Error code E0001-0010,E0001-0001 displaying CANON ir 6570

fixing unit, mother board and main power supply replaced
Error still in machine
please help me to fix it.. Thanks in advance.......

you said a new unit was installed...did it come with a new shutter and drive for the shutter? What shape is the heater in and what about the connectors on the machine side and unit 1?

[TCA TECH]

Re: Error code E0001-0010,E0001-0001 displaying ir 6570

Hi,
Have you fixed problem, if so interested as have similar issue