[Misc] canon ir6000

[mr.daus]

My customer's machine ir6000
each use A4 size paper jamming on a drum unit having
when I observed it did not have current separation corona wire,
I've replaced the corona, but it still happens
I also replace the HVT PCB but it also persists,
maybe anyone can help me solve this problem
thanks

[spectraindo]

Re: canon ir6000

Check the HV Connector / cable FG6-5057 inside the machine.
It breaks easily causing bad connection to Separation corona.

[mr.daus]

Re: canon ir6000

i've chek the HV connector too for short, but not found a short.
is there any chance broken HV wire???

[adhy]

Re: canon ir6000

hi Mr Daus try to replace HVT transformer, i ever got this problem about 2 years ago.

[spectraindo]

Re: canon ir6000

Also check the separation corona wire height, to low can also cause jamming.
The connector I mean is the one which is screwed on the rear plate of the machine where the HV wires ends.

[mr.daus]

Re: canon ir6000

@ adhy : ok i'll be try it .....

@ spectraindo : sparation coronas is hasn't current,, so i cant set height sparation coronas,, but thanks our advance

[teckat]

Re: canon ir6000

@ adhy : ok i'll be try it .....

@ spectraindo : sparation coronas is hasn't current,, so i cant set height sparation coronas,, but thanks our advance

click on pic for better view

sep.JPG

[adhy]

Re: canon ir6000

but Teckat sometime if corona set too high copies result looks blurr on the second side of paper, is there a way to avoid it? thanks regard.

[mr.daus]

Re: canon ir6000

thanks for all...
i've solve done it,,,
i clean coronas house from short current,,

sir teckat,,, i agree with adhy says,,,
if coronas set too high caused blurry image
but thanks very much our advance

[teckat]

Re: canon ir6000

I never said to raise corona height/ picture was for display purpose only

thanks

[waffu22]

Re: canon ir6000

i've chek the HV connector too for short, but not found a short.
is there any chance broken HV wire???

I Agree

[mr.daus]

Re: canon ir6000

ok bozz