c3220 won't boot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pdm134
    • Jun 2025

    #1

    c3220 won't boot

    My C3220 boots fine most of the time. Then it gets all nasty and only boots on the screen about 5% then screen goes blank no respose to keyboard, and only the green power light illuminated. Machine contines warming up but screen never comes back on. If I cycle the power a few times it will usually boot the whole way. Then its fine for the rest of the day.

    Yesterday it only booted once I kept the covers open, and then it was fine.

    Any ideas before I get my handy hammer.

    I cannot find any error codes.
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: c3220 won't boot

    REMOVE PRINTER Memory DIMS/ CLEAN W/ALCOHOL/DRY Them /RE-SEAT THEM
    Remove and re-seat boot ROM


    Swap out the Memory DIMMs (from another machine if available to test DIMMS
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    Working...